The Optimux-108 4 E1 and Ethernet or data over fiber multiplexer transports four E1 channels and optional Ethernet or V.35 high-speed data traffic over a fiber optic link.
A pair of Optimux-108 units offers easy, low-cost connectivity for distances up to 120 km (74.5 miles).
An optional secondary link provides backup using automatic switchover upon link failure, and an optional secondary power supply provides power redundancy and fail-safe operation.
The Optimux-100 4 E1 and Ethernet or data over fiber multiplexer transmits each of the E1 signals independently, keeping the clock of each E1 channel independent from the clock of any other E1 channel. The E1 interface can be 75 Ω unbalanced or 120 Ω balanced.
Various optical interfaces are available:
-
850 nm VCSEL for use with multimode fiber
-
1310 nm for use with multimode fiber
-
1310 nm or 1550 nm short or long haul laser for extended range over single mode fiber
-
single mode over fiber option
-
LRS-102 modem rack can work opposite and manage 24 Optimux-108 units
Card versions with central SNMP management are available for mounting in a rack. These provide a compact, cost-effective central solution working opposite standalone
Optimux-108 units.
Configuration, monitoring and maintenance operations can be performed via a supervisory port, using either an ASCII terminal, Telnet host, Web terminal or an SNMP management station.
This is done via a dedicated Ethernet port in the Optimux-108.
The SNMP management supports:
To facilitate system diagnostics, the Optimux features LED status indicators, AIS alarm generation, recognition, and dry contact closure upon link failure.
Products 
